Mr. Ukey provides administrative support to our office and is involved in software sales. He is the first contact for software sales.
FLAC3D TMis a numerical modeling code for advanced geotechnical analysis of soil, rock, and structural support in three dimensions. FLAC3D is used in analysis, testing, and design by geotechnical, civil, and mining engineers.
This FLAC3D V7.0 training course accommodates new and experienced users. It will be based on examples that attendees will develop and run by themselves to better grasp the mechanics of using FLAC3D V7.0, the key underlying calculation principles and the spectrum of available features. Attendees are encouraged to bring one of their specific cases that may be discussed.
The Fifth International Itasca Symposium will be held at the University of Vienna (Austria). The Symposium will features the application of Itasca software for solving engineering and scientific challenges in geomechanics, hydrogeology, microseismicity, and more.
Dr. Aglawe is a mining engineer with experience in rock mechanics (hard and soft rock) and in application of advanced numerical modeling for mining and civil projects. He has been involved in the development of models for tunnels, caverns and dams in hydroelectric projects.
Itasca™ Software License Agreement | February 17, 2018 (Update May 2018)
Please read the following terms and conditions of this agreement carefully before using the program.
Installation of the code onto your computer indicates your acceptance of the terms and conditions in this agreement.
If you do not agree with these terms and conditions, please do not install the software onto your computer.
This software program is provided by Itasca Consulting Group, Inc. (“Itasca”) or one of its authorized suppliers. Title to the media on which the software is recorded and to the documentation in support thereof is transferred to the customer, but title to the software is retained by Itasca. Itasca and its licensors own all intellectual property in the software. Itasca permits you to use the software only in accordance with the terms of this agreement. You assume responsibility for the selection of the software to achieve your intended results and for the installation of the software, the use of and the results obtained from the software.
The license is effective as indicated under the purchasing terms or until terminated. You may terminate it any time by destroying the software together with any back-up copies and returning the hardware lock. It will also terminate if you fail to comply with any term or condition of this agreement. You agree upon such termination to destroy the software together with any back-up copies, modifications, and/or merged portions in any form and return the hardware lock to Itasca.
Itasca will correct any errors in the software at no charge for twelve (12) months after the purchase date of the software. Notification of a suspected error must be made in writing, with a complete listing of the input and output files and description of the error. If, in the judgment of Itasca, the software does contain an error, Itasca will (at its option) correct or replace the copy at no cost to the user or refund the initial purchase price of the software.
Itasca assumes no liability whatsoever with respect to any use of the software or any portion thereof or with respect to any damages or losses that may result from such use, including (without limitation) loss of time, money, or goodwill that may arise from the use of the software (including any modifications or updates that may follow). In no event shall Itasca be responsible for any indirect, special, incidental, or consequential damages arising from use of the software.
You may not ship, transfer, or export into any country the software or its updates in any manner prohibited by the United States Export Administration Act or any other export laws or restrictions. In addition, you represent and warrant that you are not a citizen of, or located within, an embargoed nation and that you are not otherwise prohibited under United States Export Laws to receive the software. Rights to use the software are forfeited for failure to comply with this agreement.
Title to the hardware lock(s) associated with a license belongs to Itasca. You are wholly responsible to maintain and safeguard the hardware lock. Itasca reserves the right to determine the cost of replacing a lost or stolen hardware lock, up to and including the cost of a new license.
If the software is an update or an upgrade to a previous version, you must possess a valid license to the previous version. Any update or upgrade provided for a previous version is subject to the terms of this agreement. You may continue to use previous versions provided that (a) it is necessary to use the previous version to read or otherwise use outputs from that version of the program, (b) you do not transfer the previous version to another party, and (c) you acknowledge that any obligation that Itasca has to support the previous version of the program may end upon obtaining the update or upgrade.
If and only if the license is a network version, the terms of this agreement apply in all respects with the following exception: the software may be used concurrently on the number of machines for which the program has been licensed and as allowable by the program’s hardware lock.
If and only if the software is used in demonstration mode, the terms of this agreement apply in all respects with the following exceptions. The software is provided “AS-IS” and Itasca bears no responsibility to provide support for the software. The software shall be operable without a hardware lock, and may be limited in its capabilities, operations, or features, as determined by Itasca. You acknowledge that the software may contain bugs, errors, or other problems for which Itasca disclaims any warranty or liability obligations.
Itasca will provide support for the current release version as well as for the version immediately preceding the current version for 12 months after release of the current version.
Software support includes providing email and telephone support, at no charge, to assist the software owner in the installation of the software on the owner’s computer system. Additionally, general assistance may be provided in aiding the owner in understanding the capabilities of the various features of the software. However, no-cost assistance is not provided for help in applying Itasca Software to specific user-defined problems.
Technical support covering modeling questions, applications, definitions, interpretation of results, design guidelines, etc., can be purchased on an as-needed basis. For users who envisage the need for substantial amounts of assistance, consulting support is available. In all instances, the user is encouraged to send the problem description to Itasca by electronic mail in order to minimize the amount of time spent trying to define the problem.
Itasca reserves the right to determine what qualifies as no-cost assistance and what requires payment.
The Itasca software may contain or be accompanied by third-party software, data, libraries, or other materials that are subject to and provided in accordance with terms that are in addition to or different from the terms set forth in this Agreement. Such terms may be included or referenced in or with such third-party software. Licensee agrees to comply with such terms. In addition, Licensee will take sole responsibility for obtaining and complying with any licenses that may be necessary to use third-party software, data, or other materials that Licensee uses or obtains for use in conjunction with Itasca software. Licensee acknowledges and agrees that Itasca has no responsibility for, and makes no representations or warranties regarding, such third-party software, data, or other materials or Licensee’s use of such third-party software, data, or other materials.
Itasca reserves the right, at its discretion, to change, modify, add, or remove portions of this license agreement by posting the updates to it on the Itasca website. You will be deemed to have accepted such changes by continuing to use the Itasca software.
Personal Data refers to any information concerning a natural person making it possible to identify them or render them identifiable, either directly or indirectly, particularly by reference to ID such as a name, identification number, location data, online identity, or one or more characteristics specific to their physical, physiological, genetic, psychological, economic, cultural or social identity. The parties acknowledge that they are fully familiar with all applicable laws and regulations with respect to data protection. Each party is personally responsible for carrying out any prior formalities required and undertakes to comply with the regulation. Itasca is authorized to process personal data to perform this Agreement, to provide technical support and to send newsletters.
Itasca hereby warrants to the Customers that its employees comply with the regulations and that they are subject to a confidentiality obligation. Itasca undertakes to take all appropriate technical and organizational measures to protect the security and confidentiality of the Personal Data under the best possible conditions. Itasca Privacy Policies are available here.
You and your employees have a right to access and rectify, your personal data, and with legitimate reason you have right to restrict and erase data which concern you. You have also a right to data portability and the right to withdraw your consent. You may at any time request to exercise those rights by contacting us by email: [email protected] or by postal mail sent to the following address:
Itasca International, Inc.,111 3rd Avenue South, Suite 450,Minneapolis, MN 55401, USA