Itasca Consultants will be present at the next AFTES Congress entitled "The underground, a space of innovations".
Itasca's latest versions offer many new features and are optimized to run faster on today's computers. Upgrade to take full advantage of these advances to easily create, run, and analyze powerful numerical models.
Itasca is celebrating 40 years of solving geomechanical and hydrogeological challenges through engineering and computer simulation for the mining, civil, and energy industries.
Past News Articles
This paper describes the material properties along with the inverse limit-equilibrium and permanent deformation analyses used to investigate the 2015 reinforced slope failure at the Yeager Airport near Charleston, West Virginia.
The Itasca Constitutive Model for Advanced Strain Softening (IMASS) has been developed to represent the rock mass response to excavation induced stress changes.
Dr. Bruce L. Kutter delivered the 2020 H. Bolton Seed Lecture at Geo-Congress 2020 in Minneapolis, MN, on February 25, 2020. The full title is "Open Issues about Soil Liquefaction from a Perspective Including Physical Model Tests."
This webinar will provide a brief overview of PFC modeling using convex rigid blocks, including example applications ranging from rock-mass behavior to granular flow, and highlight important tip and tricks and modeling challenges.
Itasca Consulting Group is planning remote, online training for early 2021.
Enhanced user interface with new automated block and zone generation tools, and new structural elements. Built-in Voronoi generator, new joint models, improved commands and FISH. Multi-threaded FISH and Python scripting.
Learn more about developing an effective strategy for open pit dewatering and avoiding common pitfalls in this E&MJ article.
This is a three part tutorial series to calculate the total and effective stresses and water flow in a homogeneous embankment dam.
Griddle offers automatic, interactive, and easy-to-use surface meshing and volume grid generation capabilities for FLAC3D, 3DEC, and many other engineering modeling formats, including ABAQUS, ANSYS, NASTRAN, LS-DYNA, VRML, and CSV.
The paper "A risk-based methodology to improve the definition of geotechnical sectors in slope design" has been awarded a Silver Medal by SAIMM.
New FLAC3D introductory tutorials are now available on our website. See how easy it is to set-up and work with advanced numerical models in FLAC3D.
They are ideal for organizations with many users at different locations and/or for cloud computing.
Download the 2020 Itasca Symposium proceedings and presentations for free.
Itasca Consulting Group, Inc. is pleased to announce that Dr. Tryana Garza-Cruz is now our General Manager.
In this exceptional time of the COVID-19 pandemic, Itasca International and its offices worldwide are closely monitoring the situation. While certain Itasca offices may be physically closed due to local conditions and requirements, we are maintaining business operations, including software sales and shipping, as well as timely delivery of ongoing consulting projects. We have implemented measures to ensure our personnel’s safety and will continue to monitor conditions over the coming weeks and months and, following government and public health guidance, will respond proactively. We will provide updates as necessary.
Registration is now open for the Fifth International Itasca Symposium.
Dr. Mojtaba Bahaaddini (Shahid Bahonar University of Kerman), along with Associate Professor Glenn Sharrock (Itasca/UQ), and Professor Bruce Hebblewhite (UNSW), have landed the prestigious "Computers and Geotechnics 2019 Sloan Outstanding Paper Award".
Itasca’s research aims to answer the key industry question “how should block caves be designed and operated to achieve high recovery during cave interactions”?
Erfahren Sie mehr über die neuen Funktionen von FLAC3D Version 7.0.
Erfahren Sie mehr über die neuen Funktionen von PFC 6.0.
Itasca is pleased to announce that the 5th International Itasca Symposium will take place February 17-20, 2020 in Vienna, Austria.
UDEC, Version 7.0, is now available as a pre-release. This new version provides major enhancements for modeling capabilities, software interoperability, and updated graphics.
The latest issue of our European newsletter (Q4, 2018) is now on-line.
All newsletters can be found under the item "Newsletter" in the upper menu. Check it out!
Itasca Consulting Group is pleased to have contributed to this Transportation Research Board (TRB) webinar series, along with Derrick Dasenbrock of the Minnesota Department of Transportation, on the Benefits of Computational Modeling for Geotechnical Engineers.
Itasca Consulting Ltd (ICL) upcoming Training Courses, 2019. Microseismic Processing with InSIte: An Online Tutorial - February 2019
PFC, Version 6.0, is officially released. This new version provides major enhancements for modeling capabilities, software interoperability, and updated graphics.
Itasca Consulting Ltd's consultancy services for a wide range of industries, including Oil and gas, mining, geothermal, radioactive waste storage, underground co2 storage, and civil engineering.
We are using recorded microseismic data from a hydraulic fracturing treatment in the Horn River Basin, Canada, to calibrate a geomechanical model in order to better understand fracture growth and proppant distribution.
Resolve Energy Solutions Inc. and IMaGE (ITASCA Microseismic and Geomechanical Evaluation) are pleased to announce that they have joined forces to offer integrated induced seismicity services in Western Canada.
The latest issue of our European newsletter (Q3, 2018) is now on-line.
The latest issue of our newsletter - September, 2018 - is now published.
PFC, Version 6.0, is now available as a pre-release. This new version provides major enhancements for modeling capabilities, software interoperability, and updated graphics.
Our Newest 3D Software - Hydraulic Fracture Simulation of 3D Fracture Networks
The Australian Centre for Geomechanics looks forward to hosting the Fourth International Symposium on Block and Sublevel Caving in Vancouver in October 2018.
Professor Charles Fairhurst is at once a scientist, engineer, husband and father. He is a member of the U.S. National Academy of Engineering, member of the Royal Swedish Academy of Engineering Sciences and Officier de la Légion d’Honneur, France.
The latest issue of our European newsletter (Q2, 2018) is now on-line.
A new soil material model has been implemented in FLAC3D Version 6: PH small-strain (PHSS).
The latest issue of our newsletter - June, 2018 - is now published.
This is a free update to the PH Model now available in FLAC3D 6.
Itasca is participating at FRAGBLAST 12 in Luleå!
New functionality has been added to FLAC3D in 2018.
What's new for our codes? Several updates and new examples are now published - read more here!
The University of Minnesota's Center for Transportation Studies (CTS) has awarded its 2018 Research Partnership Award to a team that has studied "Geogrid-Reinforced Aggregate-Base Pavement Design."
In cooperation with Stress Measurement Company Oy we are now offering both rock stress measurements using theLVDT-probe and laboratory testing services.
Préachetez 3DEC V5.2 et recevez immédiatement la version beta!